このブルースクリーンの意味を教えてほしいです。
OSはwindows vistaです。
自作機で、マザーボードはASUS M2N-E。
CPUはathlon64x2 dualcore 6000+
メモリは3.5GBと認識されています。
はじめて自作したのは、もうとても昔で、6年は自作をはじめてからたっていますが、
ただ、店員さんに薦められたパーツを組み立てただけで、
自作に関しての知識がある状態ではありません。
自分で努力をしたのですが、到底、今の自分の知識ではどうにでもならないので、
こちらで質問をさせて頂きたいです。
どうか宜しくお願いします。
下に、少し長くなってしまいますが、最近表示されたブルースクリーンを、書いてみます。
どこに異常があるか知りたいです。
もう素直に全面的に買い替え、自作をするならきちんと学ぶなどをするしか、
知識のない人間にはどうしようもない状態でしょうか。
(1)
21日16時
-------------
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: hal.dll
IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000000a (0xb0b5f7d4, 0x00000002, 0x00000000, 0x81fa75a5)
*** hal.dll - Address 0x81fa75a5 base at 0x81fa1000 DateStamp 0x458dfc8e
(3)
20日19時
-------------
problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntkrnlpa.exe
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x00000050 (0xad10dcb8, 0x00000000, 0x904d7c3c, 0x00000001)
*** ntkrnlpa.exe - Address 0x81ca9ff2 base at 0x81c00000 DateStamp 0x4b7d25c9
(3)20日1時
-------------
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: Ntfs.sys
RESOURCE_NOT_OWNED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x000000e3 (0x852e59b8, 0x85118728, 0x86d73b48, 0x00000003)
*** Ntfs.sys - Address 0x826f41e0 base at 0x826bf000 DateStamp 0x4764f079
(4)
19日0時
----------
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: aswSnx.SYS
ATTEMPTED_WRITE_TO_READONLY_MEMORY
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need
嘆いても仕方がないですが、
とても長い間PCを使っていて、何もわからない自分が情けないです。
どなたか、宜しくお願いします。
![その他([技術者向] コンピューター) イメージ](https://gazo.okwave.jp/okwave/spn/images/related_qa/c205_4_thumbnail_img_sm.png)
お礼
修復といいますと、再インストールでしょうか？ 再インストールはやったのですがそれでも直らず・・・ そうなるとデバイス等になるんでしょうかね・・・？